Anaesthesia Mask Of Blow Molding

Guangdong Huaju Medical Technology Co., Ltd. is one of the leading manufacturers and suppliers of anaesthesia mask of blow molding in China. With a professional production team, we are able to meet the needs of the majority of our customers. Welcome to buy top-quality anaesthesia mask of blow molding made in China here from our factory.

HJMED #anaesthetic face masks are designed to administer anaesthetic oxygens to a patient during spontaneous or manual ventilation. An anaesthetic mask fits over the mouth and nose to create an air tight seal and are used to oxygenate patients pre operatively or administer a general anaesthetic (GA).

The mask is connected to a breathing system at the start of the GA to initially administer oxygen, followed by nitrous oxide, if used, and then the anaesthetic volatile such as Sevoflurane. Once the patient is asleep, the mask is removed and the breathing system is connected to an airway device . The face mask is used again at the end of the anaesthetic to administer oxygen to aid recovery from anaesthesia. Sometimes, but rarely, the anaesthetists might hold the mask in place for the entire procedure if it is short or use a harness to secure the mask in place if it is a longer procedure.

>> TYPES & SIZES ID:

#0 – infant

#1 – baby

#2 – child

#3 – adult

#4 – adult

#5 – adult

#6 – adult

>> FEATURES:

1). Medical grade of PVC.

2). Seven sizes are applicable for adult, child, baby and infant.

3). Soft air cushion for comfortable contact in the face.

4). For single use only.

Bacterial & viral filters are used on patients whose upper airways are being bypassed by an artificial tracheal airway for removing the patients' natural ability to filter inspired air, or for receiving artificial ventilator support where a gas is being introduced into a body cavity as during Laparoscopic surgery so as to protect equipment, staff and the whole environment from potential cross contamination.

>> PACKING:

Single pack; 10pcs each box and 200pcs each carton.

Quantity is changed when various sizes or products are packaged together.

EO sterile (non sterile is processed for any bulked pack goods).

Plywood packing with timber support is optional for LCL shipments.

Hot Tags: anaesthesia mask of blow molding, China anaesthesia mask of blow molding manufacturers, suppliers, factory